Skip to content
Built at Home
10 · Flat-pack manual · 2×4 construction

Miter Saw Station Builder

8′ 2″ miter station36″ wings · top at 36″ · saw deck at 32¼″ · $212.90
Loading model…
1
This stepDone
1
Step 1 of 9

Shopping list

Before you buy anything, measure your saw: set it on a flat bench, lay a straightedge across the table, and measure down to the bench. This plan uses 3¾″. Change it above if yours is different.

ItemQtyEachTotal
2×4×8′ SPF board14$3.50$49.00
¾″ plywood, 4×8 sheet (BC or sanded) (tops, shelves, saw deck)2$52.00$104.00
#9 × 3″ construction screws, 1-lb box (about 120)3$10.00$30.00
#9 × 2½″ construction screws, 1-lb box (about 60)1$10.00$10.00
#8 × 1⅝″ wood screws, 1-lb box (about 69)1$9.00$9.00
¼″-20 × 2″ hex bolt, nut + 2 fender washers (saw feet)4$1.10$4.40
Wood glue, 16 oz1$6.50$6.50
Total$212.90

Tools: circular saw or the miter saw itself (before it moves in), drill/driver, tape, 4′ level, 6′ straightedge or a straight 2×4, clamps, jigsaw.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

14 boards91% yield
×2¾″
×22¾″
×12¾″
×34¼″
×44¼″
×14¼″
×175″

Sheet goods

  • P Wing top, ¾″ plywood: 2 × 36″ × 23⅞″
  • S Wing shelf, ¾″ plywood: 2 × 36″ × 23⅞″
  • D Saw deck, ¾″ plywood: 1 × 26″ × 23⅞″

Rip sheet parts on a table saw or with a circular saw and a straightedge; most stores will make the first rips for free.

The saw sits on a plywood platform dropped exactly its table height below the wing tops. Measure your own saw with a straightedge across the table and a tape down to the bench; the presets are typical, not gospel.