Skip to content
Built at Home
03 · Flat-pack manual · 2×4 construction

Sawhorse Builder

2 × 36″32″ tall · 9 studs · $41.50
Loading model…
1
This stepDone
1
Step 1 of 8

Shopping list

Sawhorses are the project that pays for itself: you'll use them to build everything else. Any straight stud works; this is where cull-cart lumber shines.

ItemQtyEachTotal
2×4×8 stud, untreated SPF9$3.50$31.50
#9 × 3″ construction screws, 1-lb box (about 96)1$10.00$10.00
Total$41.50

Tools: miter saw (set to 16°) or circular saw with a speed square, drill/driver, tape, pencil, clamps.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

9 boards79% yield
×14″
×14″
×14″
×111¼″
×331⅛″
×231⅞″

The legs lean out 16° to the sides only, a lean set by the I-beam itself: each leg sits under the cap and against the edge of the bottom plate. Seen from the side they are plumb, which is what lets two horses carry a sheet of plywood without wobbling. Prices are per board at the price you enter.