Skip to content
Built at Home
01 · Flat-pack manual · 2×4 construction

Tote Rack Builder

16 totes · 4×489½″ W · 74″ H · 34″ D · $155.44
Loading model…
1
This stepDone
1
Step 1 of 8

Shopping list

One trip. Pick straight studs: sight down the edge and reject anything bowed or twisted. Stud price is the one you entered below; longer boards are estimated from it.

ItemQtyEachTotal
2×4×8 stud, untreated SPF (the cheap stud bin)27$3.50$94.50
#9 × 2½″ construction screws, star drive, 1-lb box (about 138 needed)2$10.98$21.96
#9 × 3″ construction screws, star drive, 1-lb box (about 70 needed)1$10.98$10.98
5/16″ × 4″ structural wood screw (GRK RSS, Spax PowerLag or similar) (2 per wall stud, 2 studs)4$1.50$6.00
Felt furniture pads for the upright feet, 1 pack (finished or epoxy floors)1$6.00$6.00
Watco Danish Oil, 1 qt (optional)1$16.00$16.00
Total$155.44

Lumber + hardware without the optional finish: $139.44.

Tools: miter saw or circular saw, drill/impact driver with T25 bit, tape, speed square, 4′ level, pencil, two clamps, stud finder.

Why 27 boards: 10 uprights at 74″, 32 runners at 31″ and 6 long rails, laid out with the cut diagram in the next step (runners fill the offcuts where they fit).

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

27 boards88% yield
×66½″
×1022″
×102¾″
×133⅞″

Runners are spaced ¼″ wider than the tote body just under its lip, so the *lip* rides on them and the body hangs between; no shelf decking is needed. HDX sizes without a ~ come from Home Depot's listings (exterior at top = lip size); sizes marked ~ and all body widths except the HDX 27 gal are estimates, so measure your own tote. Prices are typical big-box prices for untreated SPF studs. The wall tie must hit a wall stud; drywall anchors are not enough.