Skip to content
Built at Home
09 · Flat-pack manual · 2×4 construction

Workbench Builder

72″ × 30″ bench36″ high · plywood top · $184.50
Loading model…
1
This stepDone
1
Step 1 of 8

Shopping list

Buy straight studs for the frame and legs. Get the best-faced sheet of plywood in the stack for the top; the shelf can be the ugly one.

ItemQtyEachTotal
2×4×8′ SPF board10$3.50$35.00
¾″ plywood, 4×8 sheet (BC or sanded) (top + shelf)2$52.00$104.00
#9 × 3″ construction screws, 1-lb box (about 56)2$10.00$20.00
#9 × 2½″ construction screws, 1-lb box (about 24)1$10.00$10.00
#8 × 1⅝″ wood screws, 1-lb box (about 48)1$9.00$9.00
Wood glue, 16 oz1$6.50$6.50
Total$184.50

Tools: miter saw or circular saw with a speed square, drill/driver, tape, framing square, 4′ level, at least four clamps, glue roller or a scrap of card to spread glue.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

10 boards76% yield
×224″
×224″
×425⅜″
×114¾″
×114¾″

Sheet goods

  • P Top, ¾″ plywood: 1 × 72″ × 30″
  • S Shelf, ¾″ plywood: 1 × 72″ × 29⅞″

Rip sheet parts on a table saw or with a circular saw and a straightedge; most stores will make the first rips for free.

Height is to the work surface. A good rule: stand straight, drop your hands, and measure floor to the base of your palm; that's a bench for planing and assembly. Doubled-2×4 tops come out a multiple of 3½″ deep.