Skip to content
Built at Home
14 · Flat-pack manual · 2×4 & 2×6 construction

Yard Tool Rack Builder

8-slot tool rackwall · 54″ rail at 42″ · $59.98
Loading model…
1
This stepDone
1
Step 1 of 7

Shopping list

Pick a 2×6 with no knots along the front edge; the slots cut right through it and a knot there pops out. The ledger just needs to be straight.

ItemQtyEachTotal
2×6×8′ SPF board1$6.48$6.48
2×4×8′ SPF board1$3.50$3.50
#9 × 3″ construction screws, 1-lb box (about 21)1$10.00$10.00
¼″ × 4″ structural wood screw (ledger into studs)10$1.10$11.00
Vinyl-coated screw-in utility hook (hose, cords, trimmer)4$3.50$14.00
Exterior paint or poly, 1 qt1$15.00$15.00
Total$59.98

Tools: drill with a 1¾″ Forstner or spade bit, jigsaw or handsaw, circular or miter saw, drill/driver, tape, square, level, stud finder (wall).

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×6 × 8′

1 board56% yield
×142″

2×4 × 8′

1 board82% yield
×117⅝″

Handles drop into U-shaped slots cut in the front edge of a flat 2×6 and stand on the floor below it. Most long-handled tools have 1⅛″–1⅜″ handles; the slots are 1¾″ so a gloved hand can drop one in without aiming.